INSTALLATION
Cut the tip to the desired diameter using a utility knife and insert the tip into the retaining ring.
2. Screw the retaining ring onto the treaded end of the Funnelmax. Make sure that the seal is secured to the Funnelmax, and the center clip is holding it in place.
3. Attach the Funnelmax to the bucket by:
A. moving the bucket handle to opposite side you intend to attach the Funnelmax to.
B. Snapping the 2 side clips onto the top of bucket.
C. Attach the center clip tp the rim of the bucket. This can be done by just pressing down on the center of the Funnelmax. You should hear it click into place.
D. Check to ensure that the center clip is seated properly under the top lip of the bucket
